| An extensive range of practical tests have been
conducted on a wide variety of fires. to view various pictures of some of these tests. Fire Service Plus also
has video footage that demonstrate the superior performance of
FireAde 2000 and this footage is available
to view on CD rom. Please contact your nearest Fire Service
Plus office for your copy of the CD rom. TRANSFORMER
FIRE A major American Power Plant conducted a fire test
involving 15.000 US gallons of hydraulic transformer oil. The tests compared FireAde
2000 and AFFF Foam.
|
FireAde
2000 |
AFFF Foam |
| Total Time on Fire Scene |
40 minutes | 12.5
hours | | Total
Product Used | 10 US
Gallons | 125
US Gallons | | Actual
Extinguishment Time | 1
Minute 24 Seconds | 28
Minutes | | Total
Labour Costs | $250
for a 2 crew team | $5,200
for a 4 crew team | Heat from the fire was
so intense that fire crews had difficulties in establishing a foam blanket before
it evaporated. In the AFFF Foam test, fire crews had to remain in attendance for
over 12 hours, continuously applying foam to ensure complete extinguishment. After
only 30 seconds of applying FireAde
2000 heat sensors indicated an 800 Degrees F (426.6 Degrees
C) drop in temperature and the fire crew was able to stand down after only 40
minutes. In both cases the transformer was destroyed by the
initial explosion. The significant savings made are obvious.
BRUSH WOOD FIRE
These tests were conducted by a fully trained Volunteer Fire Department in the
USA. Approximately 10.3 acres of brush was lit in a controlled situation
in order to compare the effectiveness of FireAde
2000 and AFFF Foam.
|
FireAde
2000 | AFFF
Foam | | Premix
Dilutions | 0 . 25% |
1% | |
Water Usage |
228 US Gallons |
2.200 US Gallons | |
Product Usage |
1 US Gallon | 22 US
Gallons | |
Man Power and Hardware |
2 crew team 1 Tanker |
4 crew team 2 Tankers and 1 Water Supply Truck |
| Total Time on Scene |
28 minutes | 4.5
hours | The significant savings made are obvious. |