Click here to download a printable version of VaporAde MSDS

Material Safety Data Sheet

Product Name: VaporAde
Date Issued: April 17, 2003

Section 1 Chemical Product and Company Identification

Company Information
Telephone Numbers:
Emergency: 971 4 336 9113
Asia Oil & Gas Company: AOG
P.O. box 52120 General Assistance: Same
Dubai, United Arab Emirates Prepared By: S. Bateman

Section 2 Composition and Information on Ingredients

Composition: This product is a proprietary blend. Information will be provided to a physician as needed.

Section 3 Toxicological Information

This product is ph neutral and contains no toxic components.

Neither material nor its components fall under Sara 311 and 312 reportable limits. No SARA 313 reportable components exist in this product.

Section 4 Hazard Identification

Eye Contact: May cause redness, burning, and irritation.

Skin Contact: Other than dryness of skin, no adverse effects are expected from brief contact.

Inhalation: If vapours or mist from heating cause discomfort in nose and throat, move to fresh air.

Ingestion: May cause stomach discomfort, nausea, and diarrhea.

Chronic: None known

Medical Conditions Aggravated by Exposure: There is no evidence this product aggravates any existing medical conditions.

Section 5 First Aid Measures

Eyes: Immediately flush eyes with large amounts of water for at least 15 minutes. Get medical attention if needed. Do no attempt to neutralize with chemical agents.

Skin: Wash skin with plenty of soap and water for several minutes. Get medical attention if skin irritation develops or persists.

Ingestion: If patient is conscious and can swallow, give two glasses of water (16 oz.). Induce vomiting as directed by medical personnel. Do not induce vomiting or give anything by mouth to an unconscious or convulsing person.

Inhalation: Use proper respiratory protection based on type of fire.

Section 6 Exposure Control/Personal Protection

Eye and Face Protection: Avoid eye contact, chemical type goggles with face shield can be worn to protect eyes and face.

Skin Protection: Workers should wash exposed skin several times with soap and water. Soiled work clothing should be laundered or dry-cleaned.

Inhalation: Use proper respiratory protection if needed.

Exposure Limit for the Total Product: None established for product.

Section 7 Ecological Information/Accidental Release Measures

No adverse impact on the environment. Dispose of in accordance with Federal, State and Local regulations. Always consult local EPA for disposal regulations. Never dispose into sewers or waterways without contacting the local EPA for approval.

Spill will result in slippery surface conditions.

Section 8 Stability and Reactivity

Hazardous Polymerizations: Do not occur.
Chemical Stability: Stable
Conditions to Avoid: Strong-oxidizing agents
Hazardous Decomposition Products: None known

Section 9 Physical and Chemical Protection

Appearance: Clean
Odor: Mild pleasant clean smell
Boiling point: 270 Degrees F
PH: 7.5
Melting/freezing Point: Not determined
Evaporation Rate: Same as water
Specific Gravity: (water=1) 1

Section 10 Fire Fighting Measures

Flashpoint: Not Determined
Flammable Limits: Not Determined

Section 11 Handling and Storage

Handling: Minimum feasible handling temperatures should be maintained at 0 C - 100 C. Keep container closed, keep eye wash available, water based, keep away from electrical exposed wires or electrical fires.

Section 12 Transport Information

Under DOT code 55 for shipping

Section 13 Other Information

The information on this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, expressed or implied, regarding its correctness. Some information presented and conclusions herein are from sources other than test data on the substance itself. We do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with handling, storage, use or disposal of the product.